The following is intended to be a short review with more to come as time permits of what I
believe is a great aerial camera platform.
I've been interested in aerial photography/videography for
some time now. We've all been to the
malls where some guy is flying a small remote helicopter making it look easy
and fun. There's something like that at
the Tucson Mall and every time I walk past the store I think about how neat it
would be to put a camera on one and see what I could get; I think about flying
over the rim of the Grand Canyon, along the sand dunes of Death Valley, just
about anywhere in Moab would be great.
Then I think about Jackson
Hole WY
A company named DJI
released a ready to fly quadcopter earlier this year. The Phantom is a ready to fly quadcopter with
built-in NAZA-M-GPS. What this means is
that with just a couple minutes of assembly time, it is ready to fly, and it's
super easy. Basically you have
2-options; fly in GPS mode or manual mode with one being easier than the
other. So far I've only been in GPS mode.
It hasn't been without problems - most of them I'll take the
blame for. You have 4-motors with
2-turning clockwise and 2-counterclockwise; they're in pairs. The video instructions are clear in that you
pair the props to the motors with each being clearly marked. What isn't said is the orientation of the
props. I installed the props as I should
have (counter clock on the counter clock motors and clockwise on the clockwise
motors) and attempted my first flight.
Disaster. No liftoff and I ended
up braking a prop after it tilted over.
What wasn't said is the proper orientation of the props. I reversed the props to have the marking
facing up and quickly had my first flight; good thing the Phantom comes with
2-complete sets of propellers.
My second error was made shortly after I added the prop
guards. Thinking that I needed
"training wheels" for at least the first couple flights I added an
accessory which guards the props if tilted over. After being familiar with the Phantom I had
decided to remove my training wheels (besides they wouldn't fit inside my
case). What I forgot was the size of
screws. The guards use a slightly longer
screw than what I had removed and in a total fit of stupidly I reused the screws
which in turn made the motors bind up and quit.
But wait, there's more...
The Phantom is a very easy bird to open and upgrade so long
as you have the knowledge and proper tools with plenty of
"how-to" videos available. I
found the replacement motors at UAV Direct
and had them shipped quickly. I
removed the solder attaching the 4-motors and attempted to install the
replacements. A word about the solder
used by DJI - it is the highest temperature solder I have ever come
across. How hot? I had to crank my solder station all the way
up to the max to unsolder the motors leaving a good puddle at the connectors. The first 2-motors went on with little
problem, the 3rd began to kick and scream and the 4-was the worse. Each motor has 3-wires; I was able to solder
11 wires with little to some degree of difficulty. The very last one (isn't always the last one)
gave me the worse time. I had to keep
trying to heat the solder up to the point it would take the 12th wire and
somewhere along the way I overheated the little board and ended up destroying
it. I did a test run-up and had 2-motors
running great with one limping along while its mate just stood there. I was faced with either replacing the
controller board and trying again or walking away.
Once again this is where having a great dealer is worth
their weight in gold. I'm on a time
crunch as we're leaving Tucson for Jackson Hole.
I simply don't have the time it would take to find someone to fix what I
broke. Enter UAV Direct. I ordered a replacement Phantom and they took
back my Phantom as a trade to either fix or use for spare parts. Win win for both of us.
So, I'm back in the air and will be much more careful of
what I'm doing so I don't repeat the process.
I love the Phantom and Go Pro Hero 3 that's attached and am
looking forward to adding this to our ever growing camera kit. We've been adding video clips to our DVDs and
this will enable us to add much more, so stay tuned.
In the end, if it weren't for my errors I'd have no
problems. Again, I love the Phantom and
recommend it highly just as I do UAV Direct
in Texas
Thanks for allowing me to share.
Don
